
Directions:
Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface over 100°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.
1. Thoroughly wash vehicle free of dust, sand, and dirt.
2. Dilute GLIDE to desired strength. (2 oz. makes 16 oz. RTU.)
3. Mist sufficient GLIDE onto the surface evenly.
4. Polish the surface with dual action orbital polisher using light pressure (Low Speed).
5. Wipe off residue and apply wax or glaze.
Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface over 100°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.
1. Thoroughly wash vehicle free of dust, sand, and dirt.
2. Dilute GLIDE to desired strength. (2 oz. makes 16 oz. RTU.)
3. Mist sufficient GLIDE onto the surface evenly.
4. Polish the surface with dual action orbital polisher using light pressure (Low Speed).
5. Wipe off residue and apply wax or glaze.
![]() |
![]() |
![]() |
Step 1Spray sufficient amount of lubricant on the glass surface. |
Step 2
Slide the Autoscrub across paint or glass surface using a back and forth motion with light to medium pressure. |
Step 3Wipe and buff dry residual lubricant off the glass surface using light pressure. |
ALSO RECOMMENDED

PHONE
1-877-707-6688
1-562-691-6818 (Outside The US)
Monday to Friday, 9am to 5pm PT
MAIL
NANOSKIN Car Care Products
14700 Radburn Ave. Santa Fe Springs, CA 90670
EMAIL
Nanoskin@NanoskinUSA.com
RESOURCES
FOLLOW US
Please Subscribe to our mailing list and receive updates on new arrivals, special offers and other discount information.
Copyright © NANOSKIN Car Care Products All Right Reserved.

FROM_JS
jsprice
jsprice
FROM_JS
FROM_JS
Add to cart
Added
Limit Products
Wait..