Skip to product information
1 of 4

NANOSKIN AUTOSCRUB 6" Pad Fine Grade

NANOSKIN AUTOSCRUB 6" Pad Fine Grade

Regular price $ 49.99 USD
Regular price Sale price $ 49.99 USD
Sale Sold out
View full details
NANOSKIN AUTOSCRUB System works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. With either dual action orbital polisher or hand application, it safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required

Application Use:
• For surface prep: use with NANOSKIN GLIDE Instant Spray Lubricant
• For best results on the paint, use NANOSKIN NANO SHOCK Hydrophobic Spray Lubricant Sealant.
• For glass prep and hydrophilic anti-static sealant: use with RAIN PREP Glass Cleaner/Activator then follow with RAIN Glass Sealant.

NOTE:
• Using with 6" soft-edge DA pad is highly recommended.
• Sufficient lubrication is crucial to the AUTOSCRUB application.
• Plain water is NOT an adequate lubricant.
• DO NOT use with rotary polisher.
• The AUTOSCRUB is not solvent resistant.
• Remove tar & grease before application

Helpful Tips:
• The AUTOSCRUB has a protective coating to ensure stability within transportation.
• To break in the pad, moisten the AUTOSCRUB with desired lubricant.
• Then moisten a portion of window glass or other preferred glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam; this is the protective sealant coming off.
• Do not use until the polymerized rubber is soft and slightly tacky.
• Cold temperatures may stiffen the pad. Warm the panel / surface before using.
• There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine and our advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.

Compare with clay bars:
  AUTOSCRUB Pad Traditional Clay Bars
Application Tool Hand or Orbital Polisher Hand
Durability 50~80 times 10~15 times
Washable Yes No
Temp. Sensitivity Low to Medium Medium to High
Use with Lubricant Yes Yes
Overspray Fast to remove Slow to remove
Brake Dust Fast to remove Slow to remove
Rail Dust Fast to remove Hard to remove
Industrial Pollution Fast to remove Slow to remove
Reshape Fast to remove Required

Directions:
Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 55 °F and over 144 °F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.
• Thoroughly wash vehicle free of dust, sand, and dirt.
• Dilute GLIDE to desired strength. (16 Oz. makes 1 Gal. RTU.)
• Mist sufficient GLIDE onto the surface evenly.
• Work the surface with dual action orbital polisher (Low Speed) using light pressure or by hand with Hand Strap Applicator (AS-007) using light pressure.
• Wipe off residue with clean dry microfiber towel.
Step 1:
Spray sufficient amount of lubricant on the vehicle glass surface
Note: Do not allow the lubricant to run dry on the surface.

Step 2:
Use a DA on low speed slide Autoscrub across the lubricated glass surface with light to medium pressure.
  You can also use Autoscrub handheld sliding Autoscrub across the lubricated glass surface in a back and forth motion. Step 3:
Wipe and buff dry residual lubricant off the glass surface using light pressure.
Step 1:
Spray sufficient amount of lubricant on the vehicle paint surface
Note: Do not allow the lubricant to run dry on the surface.
Step 2:
Use a DA on low speed slide Autoscrub across the lubricated paint surface with light to medium pressure.
You can also use Autoscrub handheld sliding Autoscrub across the lubricated paint surface in a back and forth motion. Step 3:
Wipe and buff dry residual lubricant off the paint surface using light pressure.