NANO CUT Finishing Compound

Be the first to review this product

OR

Quick Overview

Item Code: NA-NCT128
Size: 1 Gl.


• The enemy of swirls
• No sling and low dusting
• Rich, swirl-free results on all paints

NANO CUT Finishing Compound

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

NANOSKIN® NANO CUT Finishing Compound is designed to follow NANOSKIN® SPEED CUT Cutting Compound and all other NANOSKIN® compounds to remove light swirls and restore optimum gloss. NANO CUT will give your smooth, flawless results when applied by hand or with an dual action orbital polisher. Its micro ceramic nano abrasives allow the polish to cut fast and leave a smooth finish in fewer passes. Ceramic nano abrasives do not break down like diminishing abrasives, which gives NANO CUT a long working time. NANOSKIN® NANO CUT permanently removes swirls and light imperfections, leaving a smooth, reflective finish. NANO CUT is VOC compliant and body shop safe.
Always use a wax or paint sealant after polishing.

DIRECTIONS:
For best results, use on clean, cool paint and out of direct sunlight.
Clean pad frequently using pad conditioner brush or compressed air using regulatory approved air nozzle.

NOTE: PAD REJUVENATION
The heavy and quick cutting of some polishers can cause the surface to become very hot and cause the oils in the polishes/compounds to prematurely flash off.
One fine mist of NANOSKIN PAD REJUVENATOR to the center of the used pad is enough lubrication to reactivate the polishes/compounds left on the pad and get it back to a serviceable condition.
DO NOT APPLY MORE POLISHES/COMPOUNDS TO THE PAD until all excess compound is removed off the pad and the pad is completely lubricated then apply a quarter size (1” diameter or 2.5 cm.) amount of product to center of pad.
More compound IS NOT the answer. After spraying PAD REJUVENATOR on the pad, you will find you will be able to finish a section without any additional compounds. There was a commercial many years ago saying, “A little dab will do you” and that’s the way this system works.

Suggested Tools for Optimum Results-
FLEX XC 3401 VRG Dual Action Orbital Polisher
RUPES LHR 15ES Big Foot Random Orbital Polisher
RUPES LHR 21ES Big Foot Random Orbital Polisher

Removing 1,500 ~ 2,500 Grit Wet Sanding Marks-
1. Apply NANOSKIN® SPEED CUT Cutting Compound uniformly to
MICROBUFF™ Cutting Pad.
2. Buff at 4800 opm, working a 2’ x 2’ section.
3. Wipe residue off using a soft, clean microfiber towel.
4. Make your own choice for finishing:
A. Apply NANOSKIN® FORMULA 67 Professional Quick Detailer
with MICROBUFF™ Polishing Pad to add a layer of wax and
restore showroom gloss. (Speed 3800 opm)
B. Apply NANOSKIN® SEAL NANO Perfect Sealant with
MICROBUFF™ Finishing Pad to remove gloss-hindering defects
while leaving a durable layer of paint protection behind.
(Speed 3800 opm)

Removing 2,500 ~ 3,000 Grit Wet Sanding Marks or Finer scratches-
1. Apply NANOSKIN® NANO CUT Finishing Compound uniformly to
MICROBUFF™ Cutting Pad.
2. Buff at 4800 opm, working a 2’ x 2’ section.
3. Wipe residue off using a soft, clean microfiber towel.
4. Make your own choice for finishing:
A. Apply NANOSKIN® FORMULA 67 Professional Quick Detailer
with MICROBUFF™ Polishing Pad to add a layer of wax and
restore showroom gloss. (Speed 3800 opm)
B. Apply NANOSKIN® SEAL NANO Perfect Sealant with
MICROBUFF™ Finishing Pad to remove gloss-hindering defects
while leaving a durable layer of paint protection behind.
(Speed 3800 opm)

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.