WET SHINE Silicone Spray Coating

Be the first to review this product

OR

Quick Overview



Item Code:  NA-WSE12
Size: 12 Oz.

•  No Wiping required
•  Works Instantly
•  Excellent on Plastic
•  Watermelon Scent


CAUTION: EXTREMELY FLAMMABLE
MAY CAUSE EYE IRRITATION.
HARMFUL OR FATAL IF SWALLOWED.
Read carefully other cautions on back panel.

WET SHINE Silicone Spray Coating

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

NANOSKIN WET SHINE Silicone Spray Coating is a clear, non-foaming coating which provides a water-resistant high gloss shine to the surface. It's fast and easy to apply and leaves a brilliant "wet shine" finish. Specially formulated to enhance the appearance of non-rubber surfaces such as vinyl, body moldings, bumpers, bumper guards, engine compartments, and door jams.WET SHINE brightens and renews any plastic surface. Great for those hard-to-reach places.      

DIRECTIONS:

  1. Shake well before using the product.
  2. PREPARE SURFACE. REMOVE DIRT, DUST, OIL AND grease. Dry surface.
  3. Test spray on inconspicuous area or scrap piece to check compatibility.
  4. Hold can 10" to 12" from surface. Use a stroking motion. Apply two or more thinner coats rather than one heavy coat. For best results, spray at 700F to 800F.
  5. Remove overspray immediately. If necessary, remove spinoff from plastic and painted panels to avoid staining.
  6. Polish surface, if desired, using a soft cloth after allowing spray to dry a few minutes. 

PRECAUTIONS:
DO NOT puncture, incinerate, or store above 1200 F (490C). Contents under pressure. Exposure to high temperature may cause bursting. Do not place can on radiator, or in direct sunlight. Keep away from heat, sparks and open flame. Use with adequate ventilation. Avoid breathing vapor or spray mist. Deliberately concentrating and inhaling the vapor of the contents may be harmful or fatal. Do not spray in eyes or mouth. If spray gets in eyes, flush with water for 15 minutes. If swallowed, do not induce vomiting. Call physician immediately. For skin contact, wash with soup and water. Provide oxygen or fresh air if overcome by vapor.

WARNING: THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE OF CALIFORNIIA TO CAUSE CANCER ABD BIRTH DEFECTS OR OTHER REPRODUCTIVE HARM.

NOTICE: TOTAL IMPORT SOLUTIONS IS NOT RESPONSIBLE FOR THE MISUSE OF THIS PRODUCT OR IF THE PRODUCT IS USED IN ANY OTHER WAY THAN DIRECTED.

Contains: Hexane (CAS#110-54-3), Propane/Butane/Isobutane Blend (CAS#68476-86-8), Silicone (CAS#63148-62-9), Mineral Oil (CAS#8042-47-5), Resin (CAS#26813-14-9)

NANOSKIN Beyond the Limit is a registered trademark of Total Import Solutions, Inc. All rights reserved.

HMIS HAZARD RATING

0-Minimal        A-Goggles

1-Slight          B-Goggles, Gloves

2-Moderate       C-Goggles, Gloves,

3-Serious           Protective Wear

4-Severe        

HEALTH

2

FLAMMABILITY

3

REACTIVITY

0

PERSONAL PROTECTION

B

 

 

 

 

 

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.