AUTOSCRUB Sponge Combo Pack - Medium Grade & Fine Grade

Be the first to review this product

OR

Quick Overview

NOW BETTER THAN CLAY!
Works 3 Times Faster with Advanced Polymer Technologyáµ€
Item Code: AS-017

•  Lasts up to 4 times longer than clay bars
• For a flawless “show room perfect” shine
• Glides on & off easily for a slick finish
• If inadvertently dropped on shop floor, simply rinse clean 
 

AUTOSCRUB Sponge Combo Pack - Medium Grade & Fine Grade

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Product Detail

NANOSKIN AUTOSCRUB System works fast and achieves professional results with the new advanced rubber polymer technology, which replaces the use of clay bars. With either dual action orbital polisher or hand application, it safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you drop the AUTOSCRUB on the ground, no worries, just rinse the sponge pad clean and you're ready to keep using it. Easy glides allows for sturdy and controlled handling, unlike clay bars where constant reshaping is required.

Application

*For surface prep., use with NANOSKIN GLIDE Instant Spray Lubricant

*To achieve best result on the paint, use with NANOSKIN NANO SHOCK Hydrophobic

 Spray Lubricant Sealant.

*For glass prep. and hydrophilic anti-static sealant, use with RAIN PREP Glass

 Cleaner/Activator then follow with RAIN Glass Sealant.

 

DIRECTIONS:

Use ONLY on clean, cool paint and out of direct sunlight. DO NOT work on the surface below 55°F and over 144°F. Please use in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.

  1. Thoroughly wash vehicle free of dust, sand, and dirt.
  2. Dilute GLIDE to desired strength. (16 Oz. makes 1 Gal. RTU.)
  3. Mist sufficient GLIDE onto the surface evenly.
  4. Polish the surface with light pressure .
  5. Wipe off residue with clean dry microfiber towel.

NOTE: Sufficient lubrication is crucial to the AUTOSCRUB application.

      Plain water is NOT an adequate lubricant.

      DO NOT use with rotary polisher.

      AUTOSCRUB is not solvent resistant.

      Remove tar & grease before application

 

Helpful Tips:

The AUTOSCRUB has a protective coating to ensure stability within transportation.

To break in the pad, moisten the AUTOSCRUB with desired lubricant.

Moisten a portion of window glass or other glass surface. Rub AUTOSCRUB in circular motion against the glass for 30~60 seconds. You may see a white soapy foam. This is the

protective sealant coming off. Don’t use until the polymerized rubber is soft and slightly tacky.

Cold temperatures may stiffen pad. Warm surface before using.

  

 

There is a significant difference between NANOSKIN AUTOSCRUB and clay bars. An outstanding machine/advanced polymer combination makes AUTOSCRUB the best contamination removal tool ever.

  

Compare with clay bars:

 

Speedy Prep Sponge

Traditional Clay Bars

Application Tool

Hand

Hand

Durability

15~25 times

10~15 times

Washable

Yes

No

Temp. Sensitivity

Low to Medium

Medium to High

Use with Lubricant

Yes

Yes

Overspray

Fast to remove

Slow to remove

Brake Dust

Fast to remove

Slow to remove

Rail Dust

Fast to remove

Hard to remove

Industrial Pollution

Fast to remove

Slow to remove

Reshape

Not required

Required

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.